• 2 Ways to Unlock

  Unlock using iOS devices or fingerprints

• Work with Apple Homekit

  The world’s first fingerprint padlock that works with Apple HomeKit

• Long-lasting & Rechargeable Battery

  It supports up to 30,000 times lock/unlock actions after a single full recharging

• Multi Users

  Each lock can store up to 50 fingerprints

• b

2 Ways to Unlock

No worry about forgetting passwords or losing keys. Keyless. No combinations. Simple. Unlock in 0.8 second using registered fingerprints or unlock using the Koogeek Home app or Siri on your BT-enabled iPhone, iPad, iPod touch, or Apple Watch. To open the lock, unlock using iOS devices or fingerprints and then pull up the shackle. Allow 30-second access time before it re-locks. You can simply press down on the shackle to close the lock.

Secure Encryption

It is the world’s first fingerprint padlock that works with Apple HomeKit. HomeKit technology provides advanced security with end-to-end encryption and authentication between this lock and your iPhone, iPad, or iPod touch. Wireless low energy technology features very low power consumption and 128-bit encryption.

Share & Control Access

Each lock can store up to 50 fingerprints. You can also share access with friends, family, or housekeeper, monitor the last 100 actions, and track when it was locked/unlocked via the Koogeek Home app. You can receive instant alerts when it is unlocked or locked.

Long-lasting & Rechargeable Battery

With the 280mAh rechargeable lithium polymer battery, it can work up to 1 year or support up to 30,000 times lock/unlock actions on a single full recharging. Check its battery level and charging status in the Home app and recharge it via the Micro-USB port.

Premium Quality

The 1/4 inch diameter stainless steel shackle and the zinc alloy body help prevent unauthorized entry, offering the maximum resistance to cutting, prying, smashing, and sawing, and ensuring that your valuables are well protected. Koogeek provides a 1-year limited warranty and lifetime technical support.

Wide Application

It can be widely used in homes, schools, gyms, office, and more indoor locations. Suitable for using on your bike, backpack, locker, cabinet, suitcase, drawer, storage box, and more.

System Requirements

Koogeek Home app (available on the App Store)
- To control this HomeKit-enabled accessory, iOS 12.0 or later is recommended.
- Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, an Apple TV 4K, Apple TV (4th generation or later) with tvOS 11.3 or later, or an iPad with iOS 12.0 or later set up as a home hub.

Note

1. Before configuring, any fingerprint can be used to unlock. To ensure the security of your home and the safety of your family, you must perform the following two steps: (1) pair the lock with your mobile device via the Koogeek Home app and (2) successfully enroll at least one fingerprint. Otherwise, the lock might be controlled by unauthorized people and all enrolled fingerprints might be deleted. 2. Six unsuccessful fingerprint attempts in a row will trigger the LED indicator to continuously flash and the product will stop responding for one minute. You can retry 1 minutes later.

Material

Zinc alloy + stainless steel

Color

Black

UPC

710033643791

Status LED indicator color

Green

Fingerprint sensor

BRK501A

Battery capacity

280 mAh 3.7V

Charging port

Micro-USB port

Input

DC 5V

Recharging time

Approx. 3.5 hours

Wireless connection

Wireless 4.2 technology

Operating temperature

0 ~ 45 ℃

Relative humidity

10% ~ 95%

Certificate

FCC, CE, UN38.3

Warranty

12-month limited warranty

• Length: Approx. 3.40inch / 86.40mm
• Width: Approx.1.96inch / 49.68mm
• Height: Approx. 1.01 inch / 25.70mm
• Weight: Approx. 7.01oz / 199g
• Diameter: 7.10 mm / 0.28 inch

Koogeek Fingerprint Lock, Reset Pin&Quick Start Guide (English, French, German, Spanish, Italian, Japanese)